technologies available for licensing

Rensselaer Polytechnic Institute has a variety of technologies ranging from chemicals to lighting systems to algorithms and everything in-between. Rensselaer’s technologies can help you start a company or be a great addition to your current technology portfolio. To see what technologies are currently available for licensing at Rensselaer, please use the search below. If you have a technology need that Rensselaer’s technologies don’t currently solve, please reach out to IPO to discuss more your needs.

Use arrow keys to navigate
Displaying 51 - 60 of 99
To implement hybrid nanodevices consisting of nanowire crossbars on top of a CMOS backplane, the challenge is to interface between the relatively coarse features of the CMOS domain and the dense nanowires above. Such an interface can be realised through a microwire to nanowire demultiplexer. This technology provides a hybrid demultiplexer architecture that combines both…
Using air as an emitting medium to generate terahertz wave has attracted attention because of its potential applications for remote distance THz wave sensing and imaging. Yet, the cutting edge energy conversion efficiency of THz wave generation with optical method is extremely low. Researchers at Rensselaer have developed a method for generating amplified terahertz radiation…
Using air as an emitting medium to generate terahertz wave has attracted attention because of its potential applications for remote distance THz wave sensing and imaging. Yet, the cutting edge energy conversion efficiency of THz wave generation with optical method is extremely low. Researchers at Rensselaer have developed a method for generating amplified terahertz radiation…
This technology is directed to nanostructures in general and to metal nanoblades in particular. Oblique angle deposition has been demonstrated as an effective technique to produce three-dimensional nanostructures, such as nanosprings and nanorods. Because of the physical shadowing effect, the oblique incident vapor is preferentially deposited onto the highest surface features…
Coating particulate material can often enhance the physical and chemical properties of the material including improved insulation properties, improved abrasion resistance, and improved strength. However, coated particulate materials are often porous and tend to absorb gases and liquids, which destroy the material, or at the very least, interfere with its insulating properties…
Since terahertz (THz) wave spectroscopy has been utilized to detect a number of chemical and explosive materials and related compounds by providing their spectral signatures in the THz frequency range, there is an interest in THz wve spectroscopy as a technique to sense improvised explosive devices. However, due to the severe water vapor attenuation of THz waves in the…
Conventional laterla trench-based components, such as trench lateral transistors, typically have a substantial undesirable capacitance related to the overlap of gate and drain electrodes in the same trench. Particularly, many trench-type lateral transistors are fabricated with the gate and the drain formed in the same trench, typically separated by an oxide layer. The overlap…
The unique properties of carbon nanotubes (CNT), more specifically, single walled carbone nanotubes (SWNT), have made them excellent candidates for applications in bio-sensing, fuel cells, and nanofabrication. Considerable research effort has been devoted to development of methods to achieve stable suspensions of highly dispersed CNTs. However, progress has been impeded by two…
An edge illuminated photovoltaic device is a photovoltaic device in which light illuminates a p-n junction through the edge of the device (i.e. in the direction substantially non-parallel) to the direction defined by the devices electrical contacts to the outer surface. While these devices are advantageous, they are yet to achieve the high efficiency and low cost required for…
Present microelectronic photoimaging applications employ onium salts for deep UV (I-line, 365 nm) photolithography. Since most onium salts do not absorb at this wavelength, photosensitizers are commonly employed. Polynuclear aromatic hydrocarbons are the most efficient known examples of electron-transfer photosensitizers for onium salts. However, they have serious drawbacks…