technologies available for licensing

Rensselaer Polytechnic Institute has a variety of technologies ranging from chemicals to lighting systems to algorithms and everything in-between. Rensselaer’s technologies can help you start a company or be a great addition to your current technology portfolio. To see what technologies are currently available for licensing at Rensselaer, please use the search below. If you have a technology need that Rensselaer’s technologies don’t currently solve, please reach out to IPO to discuss more your needs.

Use arrow keys to navigate
Displaying 71 - 80 of 122
Oxide glasses with earth ions have a number of different applications including: lasers, optical switches, optical amplifiers and have anti-glare properties. These rare earth glasses, however, come with a number of problems including concentration quenching, low solubility, and inhomogenous distributions of the glass components. This invention tackles these issues by providing…
Since terahertz (THz) wave spectroscopy has been utilized to detect a number of chemical and explosive materials and related compounds by providing their spectral signatures in the THz frequency range, there is an interest in THz wve spectroscopy as a technique to sense improvised explosive devices. However, due to the severe water vapor attenuation of THz waves in the…
Conventional laterla trench-based components, such as trench lateral transistors, typically have a substantial undesirable capacitance related to the overlap of gate and drain electrodes in the same trench. Particularly, many trench-type lateral transistors are fabricated with the gate and the drain formed in the same trench, typically separated by an oxide layer. The overlap…
The unique properties of carbon nanotubes (CNT), more specifically, single walled carbone nanotubes (SWNT), have made them excellent candidates for applications in bio-sensing, fuel cells, and nanofabrication. Considerable research effort has been devoted to development of methods to achieve stable suspensions of highly dispersed CNTs. However, progress has been impeded by two…
An edge illuminated photovoltaic device is a photovoltaic device in which light illuminates a p-n junction through the edge of the device (i.e. in the direction substantially non-parallel) to the direction defined by the devices electrical contacts to the outer surface. While these devices are advantageous, they are yet to achieve the high efficiency and low cost required for…
Present microelectronic photoimaging applications employ onium salts for deep UV (I-line, 365 nm) photolithography. Since most onium salts do not absorb at this wavelength, photosensitizers are commonly employed. Polynuclear aromatic hydrocarbons are the most efficient known examples of electron-transfer photosensitizers for onium salts. However, they have serious drawbacks…
The use of fillers in both thermoplastic and thermoset polymers has been common. The practice of filling polymers is motivated both by cost reduction and by the need to obtain altered or enhanced properties. Nanostructured dielectric materials have demonstrated advantages over micro-filled polymer dielectrics. However, this is a need to improve these nanocomposites such that…
In photoinitiated cationic ring-opening polymerization, the polymerizable substrate is subjected to irradiation with light for a brief period during which the photopolymerization must proceed essentially to completion. Consequently, only monomers that undergo very high rates of polymerization may be employed. Certain epoxide monomers display high reactivity in photoinitiated…
Data communication over wireless channels has become increasingly common, but wireless channels may be lossy such that data is often lost during transmission. This invention is directed to devices and methods for transmitting or receiving data packets in a data block in a communication network with a transport protocol. A loss toleranct TCP protocol is used in which a maximum…
Electrical impedance tomography (EIT) utilizes electrodes placed on the surface of a body to determine the complex conductivity distribution within the body. When using a voltage source in EIT, it is necessary to know both the applied voltage and the resulting current with high precision, which cannot be achieved with current systems. This invention is directed to a voltage…