technologies available for licensing

Rensselaer Polytechnic Institute has a variety of technologies ranging from chemicals to lighting systems to algorithms and everything in-between. Rensselaer’s technologies can help you start a company or be a great addition to your current technology portfolio. To see what technologies are currently available for licensing at Rensselaer, please use the search below. If you have a technology need that Rensselaer’s technologies don’t currently solve, please reach out to IPO to discuss more your needs.

Use arrow keys to navigate
Displaying 41 - 50 of 71
Optical concentrators are used to focus sunlight onto a smaller area where a photovoltaic cell is located in order to reduce the total area (and cost) of PV cells. Concentrators often have problems assocated with higher temperatures and the need to be moved to track the movement of the sun. This technology utilizes double sided PVs and multiple optical elements as a…
To implement hybrid nanodevices consisting of nanowire crossbars on top of a CMOS backplane, the challenge is to interface between the relatively coarse features of the CMOS domain and the dense nanowires above. Such an interface can be realised through a microwire to nanowire demultiplexer. This technology provides a hybrid demultiplexer architecture that combines both…
Using air as an emitting medium to generate terahertz wave has attracted attention because of its potential applications for remote distance THz wave sensing and imaging. Yet, the cutting edge energy conversion efficiency of THz wave generation with optical method is extremely low. Researchers at Rensselaer have developed a method for generating amplified terahertz radiation…
Using air as an emitting medium to generate terahertz wave has attracted attention because of its potential applications for remote distance THz wave sensing and imaging. Yet, the cutting edge energy conversion efficiency of THz wave generation with optical method is extremely low. Researchers at Rensselaer have developed a method for generating amplified terahertz radiation…
This technology is directed to nanostructures in general and to metal nanoblades in particular. Oblique angle deposition has been demonstrated as an effective technique to produce three-dimensional nanostructures, such as nanosprings and nanorods. Because of the physical shadowing effect, the oblique incident vapor is preferentially deposited onto the highest surface features…
Existing liquid lense optical focusing strategies use liquid lenses after transient oscillations have dampened. The challenge with this existing liquid lens approach is two-fold. The first issue is to overcome the liquid inertia to enable a rapid state change, and the second, is to minimize the time it takes for transients induced during stoppage to Subside. Many systems use…
Many times following orthopedic surgery or injury to lower extremeties patients are advised to gradually bear weight on their limb. Since patients do not want to cause further damage or pain to the injury they put little to no weight on the area. The application is necessary, however, for proper recovery. This invention is a mechanical device that indicates to the patient when…
Since terahertz (THz) wave spectroscopy has been utilized to detect a number of chemical and explosive materials and related compounds by providing their spectral signatures in the THz frequency range, there is an interest in THz wve spectroscopy as a technique to sense improvised explosive devices. However, due to the severe water vapor attenuation of THz waves in the…
Conventional laterla trench-based components, such as trench lateral transistors, typically have a substantial undesirable capacitance related to the overlap of gate and drain electrodes in the same trench. Particularly, many trench-type lateral transistors are fabricated with the gate and the drain formed in the same trench, typically separated by an oxide layer. The overlap…
An edge illuminated photovoltaic device is a photovoltaic device in which light illuminates a p-n junction through the edge of the device (i.e. in the direction substantially non-parallel) to the direction defined by the devices electrical contacts to the outer surface. While these devices are advantageous, they are yet to achieve the high efficiency and low cost required for…